• tikoagencyir

How To Fix A Leaking Toilet?

Updated: Mar 1

leaking toilet

Leaking toilets is one of the most awful things that may occur in any house. Have you ever been in a situation that your home's toilet leaks around the base? When the toilet leaks and we can't see the cause, It would be worrying. Fixing a leaking toilet is not that much difficult, but it is really time-consuming and needs accuracy. Stay with Eama to find the easiest way to fix the leaking toilet.

Fixing a leaking toilet is more complicated than any other common toilet issue since sometimes you should remove the entire toilet and replace the wax ring. You should be very careful when removing the toilet because the toilet tank porcelain easily will be cracked. Professional plumbers can easily do the job. If you think that you can not fix the leaking toilet yourself, call Eama. Eama is one of the predominant companies in Canada that offers Plumbing Services in Halton, Brampton, Toronto, Peel, and Mississauga.

Why toilet leaks at the base?

There are some possibilities when there is water pooling around the toilet base:

  • The bolts that secure the base of the toilet to the floor might be loose

  • The wax that seals the toilet to the drain may be faulty

  • Water condensing on the toilet might be dripping down

The water that leaks around the toilet is dirty and you must fix the leaking toilet as soon as possible. Water pooling is dangerous and will damage the flooring and subflooring.

What do you need for fixing the leaking toilet?

Here is the list of materials and tools that you need for fixing the leaking toilet:

  • Sponge

  • Bucket

  • Putty knife

  • Work gloves

  • Tub and tile caulk

  • Replacement wax ring

  • Replacement tee bolts

  • Adjustable or open-end wrench

  • Hacksaw

How to fix a toilet that leaks around the base?

There are some ways that you can do for fixing a leaking toilet:

Tighten the tee bolts:

There is a plastic cover on either side of the toilet base. Remove it from the tee bolts. Instead of that, use an adjustable, open-end, or box-end wrench to tighten the bolts. If you tighten the toilet

Purchase a New Wax Ring

Generic wax rings fit most toilets, but there are slight variations for some toilet models. If you’re unsure about which wax ring replacement will work for your toilet, describe your toilet model to the clerk at the hardware store or home center and ask for help.

Disconnect the Toilet

Begin by shutting off the water to your toilet. This can usually be done by closing the fixture shutoff valve that attaches the water supply pipe to the toilet's water fill valve. This shutoff valve will usually be located under the left side of the toilet tank, where the water supply tube connects to the water valve tailpiece. Next, flush the toilet to drain water from the tank and the bowl. Use a sponge to remove any remaining water in the toilet tank and bowl.

Next, unscrew the mounting nut that holds the supply tube to the fill valve tailpiece. Then, use an adjustable or open-end wrench to remove the nuts from the tee bolts holding the base of the toilet to the floor. If the bolts are corroded and won’t turn, or if they spin in place, use a hacksaw to sever each bolt.

Remove the Toilet

Lift the toilet away from the floor drain and carefully set it on its side. You may have to rock the toilet gently to break the seal. Be very careful when you tilt the toilet to lay it on its side, as it is easy to crack the tank unless you are gentle. Toilets have an unusual center of gravity, which can make lifting by yourself difficult; it’s a good idea to have someone help you to avoid injury or damage to your toilet. After you have removed the toilet, inspect the tee bolts. Purchase a new set if they’re rusty or corroded.

Remove the Old Wax

Use a putty knife to scrape the old wax ring away from the drain opening (horn) on the bottom surface of the toilet bowl, making sure to remove any stuck-on wax. Older wax rings build up a grimy residue over time, so be sure to have gloves and trash bags ready. Don’t forget to clear out the keyed slots for the tee bolts in the drain flange (the metal ring that sits over the toilet drain opening in the floor).

Install the New Wax Ring Place the new wax ring over the drain opening, with the plastic cone facing downward into the drain. Make sure the tee bolts are properly positioned in the key openings on each side of the drain flange.

Reinstall the Toilet Carefully lift the toilet and place it down over the drain so that the tee bolts thread up through the holes on the base of the toilet. Slowly use your body weight to press the toilet into the wax ring and rock it gently from side to side to compress the wax and create a watertight seal. Place the washers and nuts back on the tee bolts and tighten with a wrench. Make sure the tee bolts are snug but not too tight; over-tightening may crack the porcelain.

Reconnect the Water Line Reattach the water supply tube to the tailpiece of the fill valve, then turn on the fixture shutoff valve. Inspect for leaks, and tighten the connections if necessary. After the toilet tank fills completely, flush and inspect around the base of the toilet to make sure the wax ring is properly sealed and that there is no leaking. When you are confident that the wax ring is properly installed, run a bead of tub and tile caulk around the base of the toilet, where the porcelain meets the floor.

Over time, a new wax ring may compress slightly, causing the toilet to loosen and rock. Tightening the tee bolts periodically can help keep the wax seal intact.

8 views0 comments

Recent Posts

See All