How Does A Home Radiator Work?
Updated: Sep 20
Have you ever thought about how does a home radiator work? Home Radiator is the most efficient and the oldest heating system in all around the world. They are updated over these years and offered more options. The Simplicity to install and run and the effectiveness to warm the surrounding has made home radiators popular. Home radiator makes the environment warm by heating up the water or steam. They can effectively warm the surrounding air. Home Radiators are made from metal. Metal is the conductor of heat. Hot water and steam pass through radiators and then turn back. This function resulted in heating up the home radiator and environment. If you want to know, is radiator a good option to choose, first of all, it is important to know how they work?
How does the steam radiator work?
We have two kinds of radiators. Steam radiators are one of the oldest types and still being used and popular. Steam radiators are connected to the boiler. The boiler is responsible for heating up the water. The boiler turning the water to the steam by heating up the water. The heated water turns into steam and goes through pipes and reach the radiator. The energy is given off through the fins. As the steam lost the heat, it turns back to the water. This cycle will be repeated over and over. The steam becomes water and flows back down into the boiler for heating once again. The heat will be spread to the rest of the environment.
How does hot water radiator work?
Hot water home radiators are very similar to the steam water radiator. They have a more active approach to move the heat around. In a hot water system, there are always an inlet and outlet pipe. The inlet allows the hot water in and, the outlet lets the water to turn back. The water is heated in a hot water heater, it doesn’t boil but it gets very hot.
When the water gets hot enough, it is sent to all the radiators that have been installed in the house. As the hot water passes through the radiators, it will lose some of its heat. When the water gets cold, it turns back to the heating system for reheating. The temperature of the water must be high enough to warm the environment. This cycle of heating and reheating the water repeated as many times as it is needed.
Balancing the radiator heating systems:
Forced air heating systems have the original balance design in their unit, the manufacturer has predicted this requirement. But radiators must be balanced by the users to give a better heat output. The technician controls the speed of moving water in the radiators. If the water passes through the fins very slowly, then the part of the heat will be given off. If it flows through the system faster, then less heat is given off from the water.
When the radiators work properly, it gives off 10 degrees Celsius from one end to the other before moving on to the next radiator. For testing this feature, you only need a thermometer. When the water is flowing through the radiator, Put the thermometer on the inlet pipe of the radiator to see what the water temperature of the leaving water is. If the temperature drops more than 10 degrees Celsius, the water is taking too long to travel through the radiator and giving up too much of its heat to this location.
The solution to this is to open up the valve a bit more to let water flow into the radiator faster. If it’s not dropping enough, the water is flowing too quickly and the valve needs to be closed a bit.
Eama is a prominent company in Canada that offers Mechanical Services in Toronto. Eama presents all mechanical services in Halton, Oakville, Peel, Mississauga, and Brampton. If you have any problem with your radiator and heating system, do not hesitate to call us. Eama equipped with a professional team that has got the highest customer satisfaction.